Homogenizer Spares
Homogenizers are high pressure pumps with an additional homogenizing valve. Because of so many moving parts, highest pressures and abrasive products all homogenizers needs a lot of wearing and spare parts.
Simply ask us about the spare parts you need for homogenizers.
Overview of our Homogenizer Spares
Pumps valves / seats
Pump valves and valve seats are wearing parts from the homogenizer's cylinder bloc.
Homogenizing valves / seats
Homogenizing valves and valve seats are wear parts of the homogenizer. Homogenizing at extremely high pressure causes these parts to wear down significantly.
Plunger packings / gaskets
Plunger packings are wear parts of the homogenizer and must be replaced after 200 to 2000 hours, depending on the product.
Plunger
Pistons are components of the cylinder bloc and ensure that the product is pumped.
Pressure reducing valves
Pressure adjustment valves are required for hydraulic valve settings. These allow the pressure to be manually adjusted on the front panel of the homogenizer.
Cylinder blocs
Cylinder blocs often wear out after years and need to be replaced due to leaks.
Gear boxes
Homogenizer gearboxes are prone to maintenance issues due to the high load and are sometimes no longer repairable.